Protecting Programs; Playlist - Ulead DVD DISCRECORDER 2.2 User Manual

5. To select more segments, repeat steps 4 and 5.
6. To remove any extracted segment from the list, select it in the Program video
clip list and click Remove selected clips
7. To preview all extracted clips, click Play.
8. Click OK..
Tips:
• To move the Jog Bar at a fixed interval, use
Quick search interval.
• Click Invert Selection to select or deselect selected video segments.
Note: On the Program tab, applying Multi-trim Video will replace the original program
with the trimmed video (program).

Protecting programs

To ensure that video clips (programs) will not be changed or removed, you can click
the lock icon next to the Program list to switch between protected
unprotected modes. When a program is protected, only playback is allowed.

Playlist

With playlists, you can watch specific video sections in a desired playback
sequence. This is done by creating a series of video scenarios (entry points)
retrieved from DVD-VR program video clips. DVD DiscRecorder lets you create and
edit playlists from your DVD-VR disc.
To add or edit a playlist:
1. Click the Playlist tab.
2. Select a playlist to edit or click Add playlist
playlist, select it from the list then click Remove playlist
3. From the Program list, select a program and use the Jog Bar and the mark-in/
mark-out buttons, or click Multi-trim Video to locate the portions to include in
the playlist playback (for more details, see
Video). Then, click
ULEAD DVD DISCRECORDER USER GUIDE 11
Editing a program with Multi-trim
. (You can also drag and drop programs to a playlist.
.
or . Set the time interval at
to create a new one. To delete a
.
and