Table of Contents
Advertisement
30 ULEAD DVD WORKSHOP USER GUIDE
General
Undo Select to define the maximum number of
times you can reverse an action. Values range
from 1-25. To undo an action, press [Ctrl+Z] or
click Undo on the Global Commands Bar.
Smart link Select to automatically perform a
cross-check between the clips in the project and
their associated source files, allowing you to
relink the source files to the clips. This is
important when the file in the library is moved to
another location.
Always show relink message Select to display
the Relink dialog box when you click an unlinked
clip in the Library.
Check Ulead Web site every Select to specify how often the program checks the
Ulead Web site for news and updates.
Apply anti-flickering filter Select to apply the anti-flickering filter to your
slideshows. This reduces the blinking effect when viewing slideshows on a
television set.
Title safe area margin Set the viewable area of the text in the Preview
Window. This acts as a guide to ensure that the text is not truncated when
viewed on a TV screen. Recommended values are 12% for NTSC and 10% for PAL.
Default Settings
Image clip duration Specify the default
duration of image clips when they are added to
your project.
Audio track fade-in/fade-out duration
Specify the default duration for fading-in and
fading-out of an audio track. The value entered
here will be the amount of time it will take for the
volume to reach normal levels when fading-in or
the lowest level when fading-out.
Automatically fade-in and fade-out audio
Select to gradually increase/decrease the volume
of the selected track as it starts/ends playing.
Note: The above settings will be applied to
new clips added to the project. Click OK for
these settings to take effect.
Advertisement
Table of Contents
