Ulead DVD WORKSHOP 2 User Manual page 108

108 ULEAD DVD WORKSHOP USER GUIDE
• Working folder Specify the location where the DDP data and DDP control data
will be stored.
• Rewind after writing Select to rewind the DLT after the writing process is
done.
• Verify after writing Select to verify the written data with the current ISO disc
image file when the writing process is done.
To write to Digital Linear Tape:
1. Connect your DLT drive to your computer then insert a tape.
2. Click Write Disc Image to DLT on the Remote Control to open the Ulead
DLT Writer dialog box.
3. Select your DLT writer in DLT device and enter the DVD disc image file or DVD-
Video folder path in ISO image file.
4. Under DDPID information, select the DVD specification for content, the type
of DVD media to be used, the track path, and minimum readout rate for the
final disc.
5. Select Apply CSS to prevent users from easily copying your DVD.
6. If your disc image file is larger than 4.4GB, select Use DVD-9 to output DVD
content on 2 DLTs.
7. For seamless playback, select Align split point to cell boundary.
8. Under Output options, select options to output DDP header and control data
to a file. You can also enable the DLT Writer's rewind and verification functions.
9. Enter your working directory in Working folder.
10.Click Start to begin the writing process.