USING THE BUILT-IN CAMERA
1
1
2
Slide the VIDEO OUT switch to
the CAMERA position to see the
camera's image on the external
TV. Slide the MONITOR switch
to the CAMERA position to see
the camera's image on the
monitor.
NOTE: The monitor cannot be
used while playing a cassette or
karaoke cassette tape.
ADJUSTING THE PICTURE
When watching a CD+G or viewing the camera's image on the monitor screen, adjust the brightness, v-hold
and contrast as follows:
V-HOLD
If the picture moves up and down
or rolls, rotate to adjust the
vertical hold.
OPERATION (CONTINUED)
2
Lift
open
compartment and remove the
protective cover on the camera
lens. The camera will then show
the image on the monitor and/or
the external TV screen.
Rotate the camera as desired.
CONTRAST
If the picture is too strong or too
weak, rotate to adjust the contrast
and clearly define the shades of
blacks, grays and whites.
19
3
the
camera
ADJUSTING FOCUS: Rotate the
ring located on the outside of the
camera lens to adjust the
camera's focus.
BRIGHTNESS
If the picture is too light or too
dark, rotate to adjust the
brightness.