Using The Built-In Camera; Adjusting The Picture - Memorex MKS5636 User Manual

USING THE BUILT-IN CAMERA

1
Slide the MONITOR switch to the
CAMERA position to see the
camera's image on the monitor.
Slide the CDG/CAMERA switch
(on the rear of the unit) to the
CAMERA position to see the
camera's image on the external
TV.
1
1

ADJUSTING THE PICTURE

When watching a CD+G or viewing the camera's image on the monitor screen, adjust the brightness, v-hold
and contrast as follows:
V-HOLD
1
1
If the picture moves up and down
or rolls, rotate to adjust the
vertical hold.
OPERATION (CONTINUED)
2
Lift open
compartment and remove the
protective cover. The camera will
then show the image on the
monitor and/or the external TV
screen. Rotate the camera as
desired.
1
CONTRAST
1
1
If the picture is too strong or too
weak, rotate to adjust the contrast
and clearly define the shades of
blacks, grays and whites.
15
3
the camera ADJUSTING FOCUS: Rotate the
ring located on the outside of the
camera lens to adjust the
camera's focus.
1
BRIGHTNESS
If the picture is too light or too
dark, rotate to adjust the
brightness.
1
1
1
1