Using The Built-In Camera; Adjusting The Picture - Memorex MKS8580 User Manual

MKS8580.O/M.QXD 8/6/03

USING THE BUILT-IN CAMERA

1
Slide the MONITOR switch to the
CAMERA position.

ADJUSTING THE PICTURE

When watching a CD+G on the monitor screen, adjust the brightness, v-hold and contrast as follows:
V-HOLD
If the picture moves up and down
or rolls, rotate to adjust the
vertical hold.
3:09 PM Page 17
OPERATION (CONTINUED)
2
When connected to an external
TV, slide the CDG/CAMERA
switch to the CAMERA position to
see the image from the camera on
the external TV.
CONTRAST
If the picture is too strong or too
weak, rotate to adjust the contrast
and clearly define the shades of
blacks, grays and whites.
3
Open the camera compartment
and remove the protective cover
on the camera lens. The camera
will then show the image on the
monitor and/or the external TV
screen.
ADJUSTING FOCUS: Rotate the
ring located on the outside of the
camera lens to adjust the
camera's focus.
BRIGHTNESS
If the picture is too light or too
dark, rotate to adjust the
brightness.
17