Using The Goto Command; Multi-Partition Arming - Honeywell VISTA 15P - Ademco 6 Zone Control Panel User Manual

Using the GoTo Command (VISTA-20P)
If the user is authorized, a keypad in one partition can be used to perform system
functions in the other partition by using the GOTO command.
• You must use an Alpha keypad to access another partition.
• Keypads automatically return to their original partition after 2 minutes with
no keypad activity.
1.
(Security Code)
0 = return to keypad's original partition.
1 = partition 1; 2 = partition 2; 3 = common zone
The keypad beeps to confirm the partition change.
2. The keypad remains in the new partition until
directed to go to another partition, or until it
automatically returns to the original partition.
The active partition number is displayed in the
upper left portion of screen, if the option is selected.
Multi-Partition Arming (VISTA-20P)
Some users can be given Multi-Partition arming ability by being assigned to both
partitions when programming user attributes.
When attempting to arm multi-partitions:
• You must use an Alpha keypad.
• The system arms only if all partitions are "ready to arm."
• If any partition is "not ready," the system does not arm at all.
• You can use the GOTO command to bypass open zones before arming.
• If any partition is already armed when global arming is attempted, that
partition remains in its existing armed state.
+ [0] + arm command (see list below)
(Security Code)
Multi-Partition Arming Commands
2 = arms all partitions AWAY
3 = arms all partitions STAY
33 = arms all partitions NIGHT-STAY
4 = arms all partitions MAXIMUM
7 = arms all partitions INSTANT
1 = disarms all partitions
National Security Systems Inc (800) 457-1999
Accessing Other Partitions
+ [∗] + partition number (0,1,2,3)
(cont'd)
Alpha Display:
1 DISARMED
READY TO ARM
Fixed-Word Display: Green LED lit
Alpha Display:
2 DISARMED
READY TO ARM
Fixed-Word Display: Green LED lit
Alpha Display:
1 DISARMED
READY TO ARM
Fixed-Word Display: Green LED lit
– 35 –