Table of Contents
Advertisement
5. Remove the screw at the back of the server system, next to the AC power input.
Save this screw. You will re-insert it later. See letter "A" in Figure 60.
6. Lift up slightly on the front of the power supply until it clears the foot at the bottom
of the chassis. See letter "B" in Figure 60.
7. Slide the power supply forward (see letter "C") and then lift it from the chassis.
Figure 60. Removing Power Supply from the Server System (SR1630GP)
76
®
Intel
Server System SR1630GP / SR1630HGP Service Guide
AF003264
Advertisement
Table of Contents
