7. Reconnect all peripheral devices and the AC power cord.
Removing and Installing the Processor Air Duct
Always operate your server system with the processor air duct in place. The air duct is
required for proper airflow within the server system.
Removing the Processor Air Duct
1. Observe the safety and ESD precautions at the beginning of this book. See
Information" on page
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see
System
4. Lift the processor air duct from its location behind the two system blower fans (see
Figure 20 for SR1630GP; see Figure 21 for SR1630HGP).
®
Intel
Server System SR1630GP / SR1630HGP Service Guide
B
Figure 19. Installing the Server System Cover (SR1630HGP)
iii.
Cover".
A
AF001579
"Removing the Server
"Safety
33