Chapter 4. Configuring Your Server; Using The Serverguide Setup And Installation Cd; Using The Configuration/Setup Utility Program - IBM 8670 - Eserver xSeries 345 Installation Manual

Chapter 4. Configuring your server

The ServerGuide Setup and Installation CD provides software setup tools and
installation tools that are specifically designed for your IBM server. Use this CD
during the initial installation of the server to configure basic hardware features and
to simplify your operating-system installation.
In addition to the ServerGuide Setup and Installation CD, you can use the following
configuration programs to customize the server hardware:
v Configuration/Setup Utility program
v ServeRAID
v Integrated System Management Firmware Update Utility program
v LSI Logic Configuration Utility program
v IBM Director
For more information about these programs, see "Configuring your server" in the
User's Guide on the IBM xSeries Documentation CD.

Using the ServerGuide Setup and Installation CD

The ServerGuide Setup and Installation CD provides state-of-the-art programs to
detect the server model and hardware options that are installed, configures the
server hardware, provides device drivers, and helps you install your operating
system. For information about the supported operating-system versions, see the
label on the CD.
Complete the following steps to start the ServerGuide Setup and Installation CD:
1. Insert the CD, and restart the server. If the CD does not start, see "ServerGuide
2. Follow the instructions on the screen to:

Using the Configuration/Setup Utility program

The Configuration/Setup Utility program is part of the BIOS code. You can use it to:
v Change interrupt request (IRQ) settings
v Change the startup drive sequence
v Configure serial port assignments
v Enable USB keyboard and mouse support
v Resolve configuration conflicts
v Set the date and time
v Set passwords
© Copyright IBM Corp. 2003
™
configuration programs
problems" on page 33.
a. Select your language.
b. Select your keyboard layout and country.
c. View the overview to learn about ServerGuide features.
d. View the readme file to review installation tips about your operating system
and adapter.
e. Start the setup and hardware configuration programs.
f. Start the operating-system installation. You will need your operating-system
CD.
27