Table of Contents
Advertisement
To install the RAID driver in Windows
1.
During the OS installation, the system prompts you to press the <F6> key to
install third-party SCSI or RAID driver.
2.
Press <F6> then insert the floppy disk with RAID driver into the floppy disk
drive.
3.
When prompted to select the SCSI adapter to install, make sure you select
Intel(R) SATA RAID Controller (Desktop ICH10R).
4.
Follow the succeeding screen instructions to complete the installation.
To install the RAID driver in Windows Vista:
1.
Insert the floppy disk/USB device with RAID driver into the floppy disk drive/
USB port.
During the OS installation, select Intel(R) SATA RAID Controller (Desktop
2.
ICH10R).
3.
Follow the succeeding screen instructions to complete the installation.
ASUS A500/AS-D920, BA5190
A500 AS-D920.indb 53
XP:
®
2-53
4/12/10 5:54:03 PM
Advertisement
Table of Contents
