Table of Contents
Advertisement
Creating a RAID 10 set (RAID 0+1)
To create a RAID 10 set:
From the utility main menu, select 1. Create RAID Volume and press
1.
<Enter>. The following screen appears.
Intel(R) Matrix Storage Manager option ROM v8.0.0.1027 ICH10R wRAID5
[↑↓]-Change
2.
Enter a name for the RAID 10 set and press <Enter>.
3.
When the RAID Level item is highlighted, press the up/down arrow key to
select RAID 10 (RAID 0+1), and then press <Enter>.
4.
When the Stripe Size item is highlighted, press the up/down arrow key to
select the stripe size for the RAID 10 array, and then press <Enter>. The
available stripe size values range from 4 KB to 64 KB. The default stripe size
is 64 KB.
We recommend a lower stripe size for server systems, and a higher stripe size
for multimedia computer systems used mainly for audio and video editing.
5.
Enter the RAID volume capacity that you want and press <Enter>. The
default value indicates the maximum capacity allowed.
2-40
A500 AS-D920.indb 40
Copyright(C) 2003-08 Intel Corporation. All Rights Reserved.
[
CREATE VOLUME MENU
Name:
Volume10
RAID Level:
RAID10(RAID0+1)
Disks:
Select Disks
Strip Size:
64KB
Capacity:
XXX
Create Volume
Enter a unique volume name that has no special characters and is
16 characters or less.
[TAB]-Next
[ESC]-Previous Menu
]
GB
[
HELP
]
[Enter]-Select
Chapter 2: Getting started
4/12/10 5:53:48 PM
Advertisement
Table of Contents
