Table of Contents
Advertisement
•
LAN settings
If you connect your computer to a home router that is connected to your DSL/
cable modem, enable all the LAN ports. Express Gate automatically uses the
connected port.
If you plug the network cable into a different port while Express Gate is running
(e.g. move the cable from LAN1 to LAN2, restart Express Gate to activate the
new setting.
If your computer does not automatically get network settings from a DHCP
server, click Setup to configure the static IP settings manually. If your
computer automatically gets network settings from a DHCP server, skip this
step.
•
WiFi settings (if supported)
If you want to connect to a wireless network, click Setup to configure the
WiFi options. In the WiFi tab of the Advanced Network Settings box, key in
the network name of the wireless access point in the SSID field. If Security
is enabled on the wireless access point, select the corresponding security
algorithm from the dropdown list such as WEP or WAP in the Encryption
Type field, and key in the password. Click OK to enable WiFi and establish
the wireless connection.
•
xDSL / Cable dial-up (PPPoE) settings:
If you use a network cable connected directly to your DSL/cable modem,
click Setup to configure the xDSL/cable dial-up settings. Choose whether
the DSL/cable modem is connected to your computer's LAN port. Key in the
username and password for your account. Click OK to enable xDSL/cable
dial-up and establish the PPPoE connection. When PPPoE is enabled, the
port it uses will automatically be unchecked.
ASUS A500/AS-D920, BA5190
A500 AS-D920.indb 27
2-27
4/12/10 5:53:32 PM
Advertisement
Table of Contents
