Table of Contents
Advertisement
4.
The Create Array screen appears.
Marvell BIOS Setup (c) 2007 Marvell Technology Group Ltd.
[Selection]
Select free disks to create
Create Array
ID Port Disk Name
Raid Level
*0 0
Max Size(MB) :
*1 1
Capacity(MB) :
NEXT
Stripe Size :
Quick Init
Cache Mode
Array Name
Disks ID
NEXT
ENTER/SPACE:Select, ESC:Back/Exit
Use the arrow key to select the RAID Level item and press <Enter> to
5.
display the available RAID set. Select a RAID set and press <Enter>. After
you have selected the desired RAID set, select Next to create array.
Marvell BIOS Setup (c) 2007 Marvell Technology Group Ltd.
[Selection]
Select free disks to create
Create Array
ID Port Disk Name
Raid Level
*0 0
Max Size(MB) : 146480
*1 1
Capacity(MB) : 146480
NEXT
Stripe Size : 64KB
Quick Init
Cache Mode
Array Name
Disks ID
NEXT
ENTER/SPACE:Select, ESC:Back/Exit
•
•
2-46
A500 AS-D920.indb 46
[Controller]
[ Devices ]
:
RAID0
SAS : ST336754SS
73240
SAS : ST336754SS
73240
64KB
:
No
:
WriteBack
:
:
0 1
[Controller]
[ Devices ]
: RAID0
SAS : ST336754SS
*RAID0
SAS : ST336754SS
RAID1
RAID10
: No
: WriteBack
:
:
0 1
The available RAID sets vary with the number of disks you select. The
RAID sets that you are not allowed to create are grayed out.
Except for the RAID Level item, we recommend you keep the default
values for the other items in Create Array screen.
[ RAID ]
RAID Config
Size
Max Speed
Status
36.6GB SAS 3.0
FREE
36.6GB SAS 3.0
FREE
[ RAID ]
RAID Config
Size
Max Speed
Status
36.6GB SAS 3.0
FREE
36.6GB SAS 3.0
FREE
Chapter 2: Getting started
4/12/10 5:53:56 PM
Advertisement
Table of Contents
