Table of Contents
Advertisement
Issue 5.0
Extended Park
An extension Class of Service determines whether it uses the normal Park Orbit
Recall time or the Extended Park Orbit Recall time. The times are set in system
programming. When an extension with Extended Park Recall Class of Service option
parks a call, it recalls after the Extended Park Orbit Recall time. When an extension
with the Normal Park Orbit Recall Class of Service option parks a call, it recalls after
the normal Park Orbit Recall time, however the call remains in the park orbit until it is
answered.
Programmable Function Key and Service Code Available for Personal Park
The Personal Park feature is enhanced by using a Programmable Function Key or
service code (3-digit or 1-digit) to place a call in Personal Park. This option is
available for multiline terminals, single line sets, and UNIVERGE SV8100 Wireless
telephones and can be used for analog or ISDN trunks.
PBX Compatibility
You can connect your telephone system trunks to Centrex/PBX lines, rather than to
Telco trunk circuits. This makes the trunk inputs into the system 500/2500 type
compatible Centrex/PBX extensions, rather than Telco circuits. PBX Compatibility
lets the system be a node (i.e., satellite) in a larger private telephone network. To
place outside calls when the system is behind a PBX, telephone system users must
first dial the PBX trunk access code (usually 9).
The system provides the following PBX Compatibility options:
2 - 50
PBX Trunk Access Code Screening
The system can monitor the numbers users dial and screen for PBX trunk
access codes. The system can screen for up to four groups of trunk access
codes. The codes can have one or two digits, consisting of the digits 0~9,
. (You can use Line Key 1 as a wild card entry.)
PBX Trunk Toll Restriction
The system can provide the Toll Restriction for the PBX trunk, or restriction can
be handled solely by the connected PBX. If the telephone system provides the
restriction, it restricts the digits dialed after the PBX access code.
PBX Call Restriction
When the telephone system does the Toll Restriction, it can further restrict users
from dialing PBX extensions. In this case, the only valid numbers are those
dialed after the PBX trunk access code. The only PBX facilities telephone
system users can access are the PBX outside trunks.
Automatic Pause
The system automatically pauses when it sees a PBX trunk access code during
manual dialing, Speed Dialing, Last Number Redial, Repeat Redial and Save
Number Dialed. This gives the connected PBX time to set up its trunk circuits.
UNIVERGE SV8100
and
#
Features
Advertisement
Table of Contents
