Canon EOS 5D - Focusing Screen Ee-A Instruction Manual page 35

To register the modes and settings, first press the <
before the < > button. If you press the <
the camera will only select the registered modes and settings
instead.
Bulb cannot be preset.
You cannot select the registered modes and settings during
continuous shooting.
If P.Fn-03 has been set to specify the metering mode for manual
exposure, and P.Fn-06 is used to register the manual exposure
mode and a metering mode different from the one specified with
P.Fn-03, you can select the metering mode specified with P.Fn-03
by pressing the < > button.
If P.Fn-04 and/or P.Fn-05 has been set, set the shutter speed and
aperture within the range specified with P.Fn-04 and/or P.Fn-05.
If the shooting and metering modes you want to set are excluded
by the restrictions in P.Fn-01 and P.Fn-02, those Personal
Functions must be disabled. For information on clearing and
resetting Personal Functions, refer to "Clearing and Resetting
Personal Functions" in the camera's Instruction Manual provided
with the camera.
Even if the shooting and metering modes selected by P.Fn-06 are
excluded by the restrictions in P.Fn-01 and P.Fn-02, they are still
valid for P.Fn-06.
If C.Fn-4-1 or C.Fn-4-3 has been set, AF and AE will also take
effect when you press the <
When C.Fn-18 is set, P.Fn-06 is disabled.
> button
> button first,
> button.
Repeats bracketing during continuous shooting
P.Fn-07
While you hold down the shutter button, bracketing repeats
continuously in the currently selected drive mode.
This function is useful when you want to continuously repeat the
bracketing sequence.
Sets the number of shots to be bracketed
P.Fn-08
Select the number of shots from the list box.
The usual 3-shot bracketing is changed to 2-, 3-, 5-, or 7-shot
bracketing.
In bracketing shots, if you select 5-shot bracketing with 1-stop
increment, the bracketing for the shots is –2, –1, 0, +1 and +2.
This function is useful for adjusting the range of bracketing.
Even when the setting is outside the bracketing level display
range, the exposure is compensated as specified.
This function can be used in combination with C.Fn-09-2/3 and
P.Fn-09.
Changes the bracketing sequence for C.Fn-09-2/
P.Fn-09
3 to increased exposure, standard exposure, and
decreased exposure
The bracketing sequence when C.Fn-09-2/3 is selected (decreased
exposure standard exposure
increased exposure standard exposure
This function is useful when you want to start the bracketing
sequence with a increased exposure.
This function can be used in combination with P.Fn-08.
increased exposure) changes to
decreased exposure.
Introduction
Contents at
a Glance
1
Downloading
Images
2
Camera
Settings
3
Remote
Shooting
4
Preferences
Reference
Index
34 34