Starting Up Eu With Cameras Other Than The 1D Series - Canon EOS 5D - Focusing Screen Ee-A Instruction Manual

Starting up EU with Cameras other than the 1D Series

5D 30D 20D
REBELXT 350D REBEL
When the camera's power switch is set to < ON >, EU will start up
automatically.
1 Set the camera's power switch to < ON >.
Communication between the camera and the computer begins
and the above dialog box appears before the dialog box in step 2
is displayed.
With Windows 2000, a dialog box with a message such as
[Found New Hardware] is displayed and then automatically
disappears.
10D REBELXTi 400D
300D D60 D30
2 Select [Canon EOS Utility] and then click the [OK] button.
EU Main window
With Windows 2000, the [Event on device] dialog box appears. Select
[Canon EOS Utility] and then click the [OK] button to start up EU.
This procedure is only necessary when connecting your camera
and computer for the first time. From the next time you connect, EU
will start up when you set your camera's power switch to < ON >.
With the 30D REBELXTi
blinks when EU starts up.
With Windows Vista, if the window in step 2 is not displayed even
when you set the camera's power switch to < ON >, double-click
the [EOS Utility] icon on your desktop to start up EU.
EU starts up, the main window
appears, and your camera and
computer can now communicate.
Continue with "Batch
Downloading Images to Your
Computer" (p.12).
400D , the camera's LCD monitor
Introduction
Contents at
a Glance
1
Downloading
Images
2
Camera
Settings
3
Remote
Shooting
4
Preferences
Reference
Index
10 10