Setting Parameters And Applying To The Camera - Canon EOS 5D - Focusing Screen Ee-A Instruction Manual

Setting Parameters and Applying to the Camera

1Ds Mk II 1D Mk II 1Ds
With RAW Image Task (RAW image processing software), you can
adjust the tone curve of a shot RAW image, and you can save the result
as a tone curve file.
In EU, this tone curve file as well as [Sharpness] and [Contrast] settings
can be registered as processing parameters in the camera (up to three
settings), and can be used as the processing parameters when shooting
in a specific environment.
For instructions on how to save a tone curve file using RAW Image Task,
refer to "Adjusting RAW Images" in the "ZoomBrowser EX Instruction
Manual" (PDF electronic manual).
1
Click [Parameters].
The [Parameters settings] dialog box appears.
1D
2 Select a tab to be set and specify the settings for
each item.
Sets the tone curve file saved in RAW Image Task
* With the
1Ds
3
Click the [Apply to Camera] button.
The [Confirm settings] dialog box appears.
4
Check the settings and click the [OK] button.
The processing parameter is registered on the camera.
5
Click the [Close] button.
The [Parameters settings] dialog box closes and the display
returns to the shot settings window.
6 Select the registered parameter on the camera.
For selecting processing parameters, refer to "Setting the
Processing Parameters" in the camera's Instruction Manual
provided with your camera.
Sets the standard tone
curve
Select a tone curve file
saved to your computer
in the window that is
displayed
Drag left or right to set
* With the 1Ds
, [Sharpness]
1D
and [JPEG Quality] are
displayed
, [User Defined] is displayed
1D
Introduction
Contents at
a Glance
1
Downloading
Images
2
Camera
Settings
3
Remote
Shooting
4
Preferences
Reference
Index
28 28