Power Cord - LG HB1003R Service Manual

3. CAPACITOR
1. Remove the control box.
2. Open the top cover from the control box.
(See Figure 26)
3. Pull out the capacitor from the control box.
4. Disconnect all the leads of capacitor terminals.
5. Re-install the components by referring to the
removal procedure, above.

4. POWER CORD

1. Remove the control box.
2. Open the top cover from the control box.
3. Disconnect the front panel from the control box.
(See Figure 27)
4. Disconnect two leads from the capacitor and relay.
5. Pull out the power cord.
6. Re-install the component by referring to the above
removal procedure, above.
(Use only one ground-marked hole for ground
connection.)
7. If the supply cord of this appliance is damaged, it
must be replaced by the special cord.
(The special cord means the cord which has the
same specification marked on the supply cord
attached at the unit.)
H E
A T
D E
F R
O S
T
Figure 26
CO
IN
Figure 27
Disassembly
OL
FA
N
DR Y
HE
AT
FA DE
DO N FR
OR OS
T
DE
SI RE EN
D SA ER GY
VE
PU AI R
RY R
FIE
RE AU TO R
ST
AR T
Service Manual 17