8-Tuning A Musical Instrument (Tuner); Using The Tuner; Setting The Tuner; Tuning A Musical Instrument - Tascam DR-05 Owner's Manual

8-Tuning a Musical Instrument (Tuner)

TASCAM DR-05 has a built-in tuner. The unit receives a
sound from a musical instrument and allows you to tune
it accurately on the tuning meter shown in the display.

Using the tuner

Setting the tuner

1 Press the MENU button to open the
2 Use the + or − button to select
the Á button to open the
3 Use the + or − button to select
press the Á button.
screen appears.
TUNER
The screen contains the
TUNER
to set the fundamental frequency of the A.
Press the  or ¯ button to decrease or
increase the fundamental frequency.
Setting range: 435Hz - 445Hz (in 1Hz
increments, default: 440Hz)
88
TASCAM DR-05
screen.
MENU
, and press
OTHERS
submenu.
OTHERS
, and
TUNER
option
CALIB

Tuning a musical instrument

1 Open the
TUNER
near the unit.
2 Tune the instrument so that the target pitch
name appears and the center of the tuner lights.
A bar appears on the left or right of the center
if the sound is lower or higher than the target
pitch. The bar becomes longer as the sound
shifts away from the target pitch.

Adjusting the input level for tuning

1 Press the QUICK button to switch
in the bottom of the
INPUT LEVEL
2 Use the  or ¯ button to adjust the input
level. The pull-up display appears to show the input
level setting. See "Manually adjusting the input
level" on page 48 for the adjustment operation.
screen, and sound a note
to
CALIB
screen.
TUNER