Table of Contents
Advertisement
Camper Wiring Harness
(If Equipped)
~~~
A five-wire harness is stored under your vehicle. The
harness is located inside the frame rail and is even with
the front of the pickup box. This harness has a 30 amp
battery feed wire and no connector, and should be wired
by a qualified electrical technician. After choosing an
aftermarket mating connector pair, have the technician
attach one connector to the five-wire camper harness and
the other connector to the wiring harness for the camper.
The technician can use the following color code chart
when connecting the wiring harness to your camper.
0
Brown: Rear Lamps
0
Yellow: Left Stoplamp and Turn Signal
0
Dark Green: Right Stoplamp and Turn Signal
0
White (Heavy Gage): Ground
0
Light Green: Back-up Lamps
When the harness is not being used, store it in its
original place. Wrap the harness together and tie it
neatly so it won't be damaged.
Pickup Conversion to Chassis Cab
General Motors is aware that some vehicle owners
may consider having the pickup box removed and a
commercial or recreational body installed. Before you
do so, first contact the GM Zone Office for your area for
information on such conversions specific to this vehicle.
(See the "Warranty and Owner Assistance" booklet for
Zone Office.) Owners should be aware that, as
manufactured, there are differences between a chassis
cab and a pickup with the box removed which may
affect vehicle safety. The components necessary to adapt
a pickup to permit its safe use with a specialized body
should be installed by a body builder in accordance with
the information available from the Zone Office.
4-48
Advertisement
Table of Contents
