Towing Your Vehicle; Pickup Conversion To Chassis Cab; Towing - GMC 2010 Sierra Owner's Manual

Secure loose items to prevent weight shifts that
could affect the balance of your vehicle. When the
truck camper is loaded, drive to a scale and weigh
on the front and on the rear wheels separately to
determine axle loads. Individual axle loads should
not exceed either of the gross axle weight ratings
(GAWR). The total axle loads should not exceed
your vehicle's gross vehicle weight rating
(GVWR). These ratings are given on the vehicle
certification label attached to the rear edge of the
driver's door. See Certification/Tire Label under
Loading the Vehicle on page 5 33. If weight ratings
are exceeded, move or remove items to bring all
weights below the ratings.
When you install and load your slide-in camper,
check the manufacturer's instructions.
If you want more information on curb weights,
cargo weights, Cargo Weight Rating and the
correct center of gravity zone for your vehicle,
your dealer can help you. Just ask for a copy of
Consumer Information, Truck-Camper Loading.
5-48

Pickup Conversion to Chassis Cab

We are aware that some vehicle owners might consider
having the pickup box removed and a commercial or
recreational body installed. Owners should be aware
that, as manufactured, there are differences between a
chassis cab and a pickup with the box removed which
could affect vehicle safety. The components necessary
to adapt a pickup to permit its safe use with a
specialized body should be installed by the body
builder.

Towing

Towing Your Vehicle

To avoid damage, the disabled vehicle should be towed
with all four wheels off the ground. Consult your dealer
or a professional towing service if the disabled vehicle
must be towed. See Roadside Assistance Program on
page 8 7.
To tow the vehicle behind another vehicle for
recreational purposes, such as behind a motorhome,
see Recreational Vehicle Towing following.