GMC JIMMY 2002 Manual page 315

5-6
6. Connect the red
positive (+) cable to the
positive (+) terminal of
the dead battery. Use a
remote positive (+)
terminal if the vehicle
has one.
7. Don't let the other end
touch metal. Connect it
to the positive (+)
terminal of the good
battery. Use a remote
positive (+) terminal if
the vehicle has one.
Don't let the other end touch anything until the next
step. The other end of the negative (
go to the dead battery. It goes to a heavy, unpainted
metal engine part, or to a remote negative (
terminal on the vehicle with the dead battery.
9. Connect the other end of the negative (
least 18 inches (45 cm) away from the dead battery,
but not near engine parts that move. The electrical
connection is just as good there, and the chance of
sparks getting back to the battery is much less.
8. Now connect the black
-
negative ( ) cable to the
-
negative ( ) terminal of
the good battery. Use a
-
remote negative ( )
terminal if the vehicle
has one.
-
) cable doesn't
-
)
-
) cable at