Symantec PCANYWHERE - ADMINISTRATOR GUIDE V12.1 Administrator's Manual page 48

48 Deploying Symantec pcAnywhere custom installations
Deploying installation packages using Web-based deployment
Customizing Start.htm
The parameters in the Start.htm file contain information about the Web server
and the location of the files that need to be installed. The configuration parameters
are located near the bottom of the Start.htm file, inside the <object> tags.
Table 3-2 describes the configuration parameters.
Start.htm configuration parameters and values
Table 3-2
Parameter
ServerName
VirtualHomeDirectory
ConfigFile
ProductFolderName
MinDiskSpaceInMB
ProductAbbreviation
To customize Start.htm
1
In a text editor, open
2
Search for the <object> tags and type the correct values.
3 Save and close the file.
Customizing Files.ini for package deployment
Modify Files.ini to contain the name of the package executable file that you want
to deploy. Additional information is required to support MSI deployment.
See "Customizing Files.ini for MSI deployment"
Value
The name of the server that contains the installation
source files. You can use Hostname, IP address, or
NetBIOS name. The source files must reside on an
HTTP Web server.
The virtual directory of the HTTP server that contains
the installation source files (for example,
Deploy\Webinst).
The file name of the Files.ini file. The default value
for this parameter does not need to be changed unless
you have renamed Files.ini.
The subdirectory that contains the source files to be
downloaded locally. This subdirectory contains the
package and Files.ini (for example, Webinst).
The minimum hard disk space requirement. The
default value is appropriate.
The abbreviation for the product. The default value
is appropriate.
.
Start.htm
on page 49.