Run A Backup With Options - Symantec GHOST 14 Manual

84 Running and managing backup jobs
Running an existing backup job immediately

Run a backup with options

Note: If necessary, you can run a quick backup of a particular drive without using
a defined backup.
See "Running a One Time Backup"
Norton Ghost can be configured to run a backup automatically when an event
occurs on your computer, such as installing a new software program.
See "Enabling event-triggered backups "
When you run a backup, you should close any partitioning software that is running,
such as Norton PartitionMagic. Also, you should not run any disk defragmenting
software during a backup.
You can also schedule backups to run automatically, according to a schedule.
See "Editing a backup schedule "
To run an existing backup immediately from the system tray
1
On the Windows desktop, right-click the Norton Ghost system tray icon.
2
Click Run Backup Now.
3
Click a backup job to start the backup.
If the menus displays No Jobs, you must start Norton Ghost and define a
backup.
To run an existing backup immediately from within Norton Ghost
1
On the Home page, click Run or Manage Backups.
2
Select a backup from the list, and then click Run Now.
If you want to quickly run an existing drive-based backup, but you want the backup
to create an alternate type of recovery point, use the Run Backup With Options
feature.
This is a unique option in that if you run an existing backup job, the recovery
point created is dictated by the type of recovery point that was created the last
time the backup job was run. Use this option to create an alternate recovery point
type.
Note: Using this option does not change the settings of the defined backup. To do
that, you must open the backup and modify its settings manually.
See "Editing a backup schedule "
on page 63..
on page 87.
on page 89.
on page 89.