Symantec GHOST 14 Manual page 150

150 Recovering files, folders, or entire drives
About LightsOut Restore
The files are copied from the Symantec Recovery Disk. After the files are
copied, you receive a message that indicates that LightsOut Restore
successfully installed.
7
If you want to ensure that you can use the LightsOut feature when you need
it, check the Test installed LightsOut Restore check box.
While doing so requires a reboot of your computer, it could be worth the extra
effort in the event that you need to utilize LightOut Restore from a remote
location.
8 Click Finish.
Editing or rerunning the LightsOut Restore setup
You can run the LightsOut Restore Wizard again if you need to edit the
configuration settings, or if you need to rebuild an existing, modified Symantec
Recovery Disk.
To edit or rerun the LightsOut Restore setup
1
Start Norton Ghost, and then click File > LightsOut Setup.
2
Step through the wizard panels to make your changes.
3
When you are finished, click Finish.
4
Do one of the following:
Click Yes to recopy all of the files.
Click No.