Using Snmp Data Mapping Tables - Symantec ALTIRIS INVENTORY 7.0 SP2 - FOR NETWORK DEVICES V1.0 Manual

26 Mapping network device data

Using SNMP data mapping tables

Using SNMP data mapping tables
the SNMP Device Classifications page of Network Discovery. This list cannot be
manually edited from the SNMP Data Mapping Tables page. However you can
configure it from the SNMP Device Classifications page of Network Discovery.
For more information, view topics about classifying SNMP devices in the Symantec
Management Platform Help.
To gather the same inventory from different Notification Servers, you can also
export the table and then import it on a different server.
See Exporting and importing SNMP data mapping tables"
You can also test the table definitions to ensure that you have defined the field
values for a table definition correctly. When you test the table, you test it on a
single device that you specify.
You use SNMP data mapping tables to define how to map SNMP devices to the
data that you want to collect. Many predefined tables are provided for common
SNMP devices. You can also create your own tables to customize the data collected.
The predefined mappings are read-only and cannot be edited.
See About SNMP data mapping"
To view SNMP data mapping tables
1
In the Symantec Management Console, on the Home menu, click Discovery
and Inventory > Agentless Inventory.
2 In the Agentless Inventory Quick Start, click Data mapping tables.
A list of tables is displayed on the left.
3 To view the details of the table, click a table.
The table details are displayed on the right under the Table details tab.
4
To view the SNMP devices that the tables are mapped to, click the Device
mappings tab.
To test a table on a single device
1
Either in a new table, or in the details of an existing table, click Test on Device.
2
Enter the host address or host name of the device you want to test.
3 Click Test.
If a valid response is received from the device, the data appears.
on page 25.
on page 28.