Symantec ALTIRIS DEPLOYMENT SOLUTION 7.1 - FOR DELL SERVERS V1.0 Manual page 36

36 Configuring BIOS, DRAC, and RAID
Defining rules for RAID configurations
8 To configure additional matching controllers with this same rule, click
Advanced, and select the option. Enter the text for the controller name, and
then click the close icon in the top right corner.
For example, you have one controller defined. If this option is not selected,
any extra controllers are ignored and are not configured. If you enable this
option, the extra controllers are configured if they match your rule.
When this option is enabled, a blue + icon displays at the top of a controller s
rule on the main Configure RAID Controllers page. You can click OK at the
bottom of the RAID tool to save your progress and view the corresponding
icon.
9
To restrict this rule to servers that have the same number of controllers that
you define, click Advanced at the bottom of the left panel.
For example, you have two controllers defined. If this option is not selected,
any new servers must have exactly two controllers for this rule to match. If
you enable this option, the new servers must have at least two controllers for
this rule to match.
The default is to enable this option. When this option is enabled, a blue + icon
displays to the left of the last controller definition on the main Configure
RAID Controllers page. You can click OK at the bottom of the RAID tool to
save your progress and view the corresponding icon.
10 Click OK.