Configuring BIOS, DRAC,
and RAID
This chapter includes the following topics:
About configuration files
Deployment Solution for Dell saves configuration files for BIOS, DRAC, and RAID
every time inventory runs. For each type of Dell server, inventory automatically
runs every time that server boots to the Dell WinPE environment. A new DRAC
configuration, BIOS configuration, and RAID configuration file is then stored on
the associated Notification Server. Those configuration files are then stored in
the CMDB.
For example, if you have a new server, you might PXE boot it to WinPE if the server
isn t known to Deployment Solution. The server boots up and gathers inventory,
such as your address name, system name, and other identifying information.
Then, the Dell inventory information is gathered. This information is stored as
the configuration files for that server.
About configuration files
Configure BIOS - Advanced task type
Configure BIOS - Simple task type
Configure DRAC - Advanced task type
Configure DRAC - Simple task type
Configure RAID - Advanced task type
Defining rules for RAID configurations
Chapter
5