Removing The 6.10 Driver; Removing The 6.10 Driver For Windows 95 And 98 - Cisco AIR-PCM342 Hardware Installation Manual

Removing the Driver

Removing the 6.10 Driver

Removing the 6.10 Driver for Windows 95 and 98

Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Step 12
Step 13
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide
4-10
To determine if the 6.10 driver is installed on your computer, open the Aironet
Client Utility (ACU) by clicking on the ACU icon on the desktop and select
Status from the Commands pull-down menu. The driver version is indicated in
the NDIS Driver Version field.
To uninstall the 6.10 driver, follow the instructions that apply to your computer's
operating system.
Make sure the previous client adapter is in your computer and the computer is
booted up.
Right-click the WepStat icon in the system tray on your desktop. This icon looks
like two connected computers.
Click Terminate.
Insert the Cisco Aironet Series Wireless LAN Adapters CD into your computer's
CD-ROM drive.
Open Windows Explorer and find the \Utilities\RmWep directory on your
computer's CD-ROM drive.
Double-click the RmWep.exe file.
Minimize Windows Explorer.
Double-click My Computer, Control Panel, and Network.
In the Network window, select the Cisco Systems wireless LAN adapter.
Click Remove and OK.
When prompted to restart your computer, click No.
Maximize Windows Explorer.
Click View, Options or Folder Options, and View. Under Hidden files, make
sure Show all files is selected, make sure the Hide file extensions for known
file types checkbox is deselected, and click OK.
Chapter 4 Troubleshooting and Routine Procedures
OL-0795-01