Cisco AIR-PCM342 Hardware Installation Manual page 50

Installing the Correct Driver
When the client adapter driver is displayed, click Next to copy the required files.
Step 5
During driver installation, you may be prompted to enter a path to the Windows
Step 6
98 operating system files. If so, do one of the following:
•
•
Step 7 The Add New Hardware Wizard window opens and indicates that the installation
is complete. Click Finish.
Step 8 When prompted to restart your computer, remove the CD and click Yes.
When the computer restarts, double-click My Computer, Control Panel, and
Step 9
Network.
Select the Cisco Systems wireless LAN adapter and click Properties.
Step 10
In the client adapter Properties window, click the Advanced tab.
Step 11
Step 12 Select Client Name. Type your computer's unique client name in the Value
dialog box.
Step 13 Select SSID. Type your RF network's (case-sensitive) SSID in the Value dialog
box. Click OK.
Step 14 If you are not connected to a DHCP server, double-click My Computer,
Control Panel, and Network. Select TCP/IP -> Cisco Systems Wireless LAN
Adapter. Click the Properties button, select Specify an IP address, and enter
the IP address, subnet mask, and default gateway address of your computer
(which can be obtained from your system administrator). Click OK.
In the Network window, click OK.
Step 15
Step 16 When prompted to restart your computer, click Yes.
The driver installation is complete.
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide
3-12
If the Windows 98 operating system files are installed on your computer, they
are usually located in the C:\Windows\Options\Cabs folder. Type
C:\Windows\Options\Cabs in the Copy files from dialog box. Click OK to
copy the required files.
If Windows 98 prompts for the Windows 98 operating system CD, insert this
CD into your CD-ROM drive. If your CD-ROM drive is drive D, the path in
the dialog box should be D:\WIN98. Click OK to copy the required files.
Chapter 3 Installing the Client Adapter
OL-0795-01