Cisco AIR-PCM342 Hardware Installation Manual page 69

Chapter 3 Installing the Client Adapter
Follow the steps below to install the client utilities for Windows 95, 98, NT, 2000
or Me.
Close any Windows programs that are running.
Step 1
Step 2 Insert the Cisco Aironet Series Wireless LAN Adapters CD into your computer's
CD-ROM drive.
Select Start > Run and enter the following path (where D is the letter of your
Step 3
CD-ROM drive): D:\Utilities\ACU\setup.exe.
When the Welcome screen appears, click Next.
Step 4
In the Authentication Method screen, select the server-based authentication
Step 5
method preferred for wireless network access in your location and click Next:
•
•
•
Step 6 In the Select Components screen, make sure the client utilities that you want to
install are selected and any that you do not want to install are deselected. Click
Next.
In the Select Program Folder screen, click Next to allow icons for the client
Step 7
utilities to be placed in the Cisco Systems, Inc. folder.
OL-0795-01
If you select None (the default value), server-based authentication is not
enabled for your client adapter. After the client utilities are installed, you can
elect not to implement any security features, or you can activate some level
of security by using WEP keys. Refer to the Cisco Aironet Wireless LAN
Adapters Software Configuration Guide for instructions on setting WEP keys
using CEM and enabling WEP through ACU.
If you select LEAP, LEAP is enabled on your client adapter, provided an
EAP-enabled RADIUS server is running on your network. After LEAP is
enabled and your computer is rebooted, your client adapter authenticates to
the RADIUS server using your network logon and receives a session-based
WEP key.
If you select EAP, EAP is enabled on your client adapter, provided an
EAP-enabled RADIUS server is running on your network. If your computer
is not using an operating system with built-in EAP support, this option is not
available. After EAP is enabled and your computer is rebooted, your client
adapter authenticates to the RADIUS server using your network logon and
receives a session-based WEP key.
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide
Installing the Client Utilities and Enabling LEAP or EAP
3-31