Dhcp; Dhcp Settings - TP-Link TL-WDR3600 User Manual

3. Make sure the Access shared storage with password on the page "USB Settings -> Storage
Sharing" is Enabled.
4. Click the Start button to start the Guest Network Storage Sharing.
5. Click the Add New Folder to Share button to specify a folder to share for the guests.
There is one default user account that can access the Guest Network Storage Sharing. Clicking
Modify on Figure 4-45, there will pop up Figure 4-46, where you can change the password and
storage authority of the account.

Note:
1. If you want guests visit folders of Guest Network Storage Sharing with guest account, you
must enable Access shared storage with password on the page "USB Settings -> Storage
Sharing", or the guests can't access to the Guest Network Storage Sharing.
2. The max share folders number is 6. If you want to share a new folder when the number has
reached 6, you can delete a share folder and then add a new one.
4.9

DHCP

Figure 4-47 The DHCP menu
There are three submenus under the DHCP menu (shown in Figure 4-47), DHCP Settings,
DHCP Clients List and Address Reservation. Click any of them, and you will be able to
configure the corresponding function.
4.9.1

DHCP Settings

Choose menu "DHCP → DHCP Settings", you can configure the DHCP Server on the page as
shown in Figure 4-48.The Router is set up by default as a DHCP (Dynamic Host Configuration
TL-WDR3600
Figure 4-46 Modify User Account of Guest Network
N600 Wireless Dual Band Gigabit Router
- 60 -