TP-Link TL-WDR3600 User Manual page 22

IP and PPPoE to connect to the Internet. It's recommended that you make use of the
Auto-Detect function. If you are sure of what kind of connection type your ISP provides, you
can select the very type and click Next to go on configuring.
4. If you select Auto-Detect, the Router will automatically detect the connection type your ISP
provides. Make sure the cable is securely plugged into the Internet port before detection. The
appropriate configuration page will be displayed when an active Internet service is
successfully detected by the Router.
1) If the connection type detected is PPPoE, the next screen will appear as shown in Figure
3-7.
User Name/Password - Enter the User Name and Password provided by your ISP.

These fields are case-sensitive. If you have difficulty with this process, please contact
your ISP.
Confirm Password - Enter the password again to make sure that the password is

correct.
2) If the connection type detected is Dynamic IP, the next screen will appear as shown in
Figure 3-8. A MAC address is a 12-digit code assigned to a unique piece of hardware for
identification. Some ISPs will register the MAC address of your computer when you
access the Internet for the first time via the cable/ADSL modem they offered. If you add a
router into your network to share the Internet, the ISP may not recognize the new MAC
TL-WDR3600 N600 Wireless Dual Band Gigabit Router
Figure 3-6 WAN Connection Type
Figure 3-7 Quick Setup - PPPoE
- 12 -