To Connect Using Wps; Pbc (Push Button Configuration) Method - TP-Link TL-WDN3200 User Manual

3.2 To connect using WPS

WPS (Wi-Fi Protected Setup) function allows you to add a new wireless device to an existing
network quickly.
If the wireless router supports WPS or QSS (Quick Secure Setup), you can establish a wireless
connection between wireless card and router using either Push Button Configuration (PBC)
method or PIN method. Three WPS connection methods are listed in the following parts.

3.2.1 PBC (Push Button Configuration) method

1. Press the WPS button on the back panel of the router. Here takes router TL-WR2543ND
for example.
2. Press the WPS button on the adapter. There are two ways:
1) Press and hold the WPS button on the adapter directly for 2~3 seconds until Figure
3-9 appears.
TL-WDN3200 N600 Wireless Dual Band USB Adapter
Figure 3-6
Figure 3-7
12