Chapter 3 Connect To A Wireless Network; To Connect Using Twcu - TP-Link TL-WDN3200 User Manual

Chapter 3 Connect to a Wireless Network

With both the hardware and software successfully installed into your computer, you can quickly
connect to a wireless network using one of the following methods.
Method One:

To connect using TWCU

TL-WDN3200 uses the TP-LINK Wireless Configuration Utility as the management software.
The utility provides you an easy interface to connect to a network and to change any settings
related to the wireless adapter.
Method Two:
To connect using WPS
Just by pushing the WPS button, you can set up a wireless connection quickly under the
condition that your router or access point supports WPS (also called QSS).
Method Three:
To connect using Windows built-in wireless utility
Windows users may use the built-in wireless utility to connect to a wireless network. For specific
operations, please go to
3.1 To connect using TWCU
1. After installation, the utility configuration page will automatically pop up on the screen. If the
utility page does not pop up, you can launch the utility by double-clicking the
your desktop.
2. The Network page will display all wireless networks that are available in your area. To
connect to a network, simply select the wireless network name and click Connect.
SSID (Service Set Identifier) is the name of the wireless network. The adapter will
TL-WDN3200
3.3 To connect using Windows built-in wireless
Figure 3-1
N600 Wireless Dual Band USB Adapter
9
utility.
icon on