7.
After all the steps above, you will see the screen below. Click Finish to complete the setup.
8.
After installation, the utility configuration page will automatically pop up as shown in the
following figure and the icon
please refer to
Chapter 3 Connect to a Wireless
Note:
If you have only installed the driver, the above configuration page will not pop up. You need to
use the Windows built-in wireless utility to connect to and manage your network.
TL-WDN3200
N600 Wireless Dual Band USB Adapter
Figure 2-7
will appear on your desktop. To connect to a network,
Network.
Figure 2-8
8