Setting An Index Mark Or A Temp Mark - Olympus WS-560M Instructions Manual

Setting an index mark or a temp mark

If index marks and temp marks are placed,
you can quickly find a location you want
to listen to in fast forward and fast rewind
and when cuing a file. Index marks cannot
be placed on files created on machines
other than Olympus IC recorders, but temp
marks can be placed instead to temporarily
remember desired locations.
1
While the recorder is during
recording mode or playback
mode, press the INDEX/ERASE
button.
• Even after an index or temp mark is
placed, recording or playback will
continue so you can place index or
temp marks in other locations in a
similar manner.
• A number appears on the display and
an index mark or temp mark will be
placed.
+− button
9 0 button
OK ` button
INDEX/ERASE button
Clearing an index mark or a temp
mark:
1
Locate the index or temp mark
you want to clear.
2 Press the 9 or 0 button to
select the index or temp mark to
erase.
3
While the index or temp number
appears for approximately 2
seconds on the display, Press the
INDEX/ERASE button.
• The index or temp mark is erased.
• Index or temp numbers after the
erased index or temp number will
automatically move up.
Notes
• Temp marks are temporary markings,
so if you move to another fi le, switch to
the list screen, or connect the recorder
to a computer, they will be automatically
erased.
Playback
3
31