Dixon ZTR 2301 Operator's Manual page 19

OPERATION INSTRUCTIONS
START\NG INSTRUCTIONS:
1. Move throttle control to "Choke" position if engine is cold, full throttle if warm.
2. Insert ignition key and turn to "Start" position. When engine starts, release
ignition key. Key will return to "Run" position.
3. Move throttle from "Choke" to desired speed position.
NOTE: While mowing, "blade(s) engaged", throttle control should be set to the
MAXIMUM or wide open setting to insure adequate cooling of the engine
and to maintain mower deck blade speed.
Engine cannot be restarted when blade is engaged or the parking blade is
off.
Safety switches stop engine when operator leaves seat while mower blade
is engaged.
Always turn engine off when leaving mower.
DO NOT rely on safety switches.
Page 16