Cutter Blades - Dixon Speedztr 44/968999538, 36 968999539, 42/968999546, 44/968999547 Safety And Operating Manual

CARE AND MAINTENANCE
CAUTION
!
CUTTER BLADE MAINTENANCE
Check sharpness of mower blades after
every 10 hours of operation. Observe
proper blade position prior to removal.
1. Safely raise front of mower.
2. Hold or block blade from turning.
3. Loosen blade bolt and remove
blade.
4. When replacing blade, tighten blade
bolt securely. Be sure blade is
centered on pilot before tightening.
See chart.
Deck Size:
36",44"
42"
Blades should be discarded
when worn excessively.
New blade
—Fig. 7—
Stop engine and remove ignition key for
safety. Wear heavy, thick gloves when
holding onto cutter blade, avoid the sharp
edge of the blade.
Tighten to:
50-60 ft. lbs. (68-81 Nm)
35 ft. lbs. (48 Nm)
When notch starts,
discard blade
35
36" and 44"
50-60 ft. lbs. (68-81 Nm)
—Fig.5—
42"
35 ft. lbs. (48 Nm)
—Fig.6—
DANGEROUS!
Do not use blade
in this condition!