THUNDER TIGER MTA4 Instruction Manual page 8

OPERATING RADIO THROTTLE / BRAKE
11
AND REVERSE FUNCTION
a
d
a.
Check the radio throttle/brake functions. With the radio transmitter and receiver on, pull the trigger/push
the stick forward. The carburetor should be fully opened and the brake disengaged. To reverse this
function, flip the throttle/brake servo reverse switch.
b.
Return the trigger/stick to neutral. The carburetor should be closed to a point where the idle has been
set (see step for ADJUSTING THROTTLE/BRAKE LINKAGE), and the brake still disengaged. If not,
use the throttle/brake trim lever to correct it.
c.
Push the trigger/pull the stick backward. The carburetor opening should still be the same at neutral,
throttle spring compressed slightly, and the brake engaged.
d.
Press the Forward/Reverse Button. This will shift the truck into Reverse. Press the Forward/Reverse
Button again to shift the truck into Forward.
b
7
c
c