Cleaning Tools - Hoover U5433 Owner's Manual

Cleaning tools

Tools allow for cleaning surfaces above
the floor and for reaching hard to clean
areas.
The cleaner is ready for tool use when
handle is in upright position.
CAUTION: Agitator continues to rotate
while cleaner handle is in upright
position. Avoid tipping cleaner or
setting it on furniture, fringed area
rugs or carpeted stairs during tool use.
How to clean tools
To clean the hose, wipe off dirt with a
cloth dampened in a mild detergent.
Rinse with a damp cloth.
Cleaning tools may be washed in warm
water with a detergent. Rinse and air dry
before using.
31
Attach wand and
tools
When using cleaning tools, cleaner
31
handle should be in the upright
position. Also, turn cleaner OFF
before disconnecting and connecting
hose to hose tube (A).
To use hose, lift hose end as shown.
29
How to attach tool
cover
The tool cover is designed with a
29
"break-away" feature which allows
it to snap free if it is pushed open too far.
To reattach, align hinges of cover with
slots on sides of tool storage area.
Push cover down to secure in place.
32
A
B
Attach tool or wand to the hose (B)
32
by pushing it firmly into hose.
Attach second wand or tool to wand (C)
by pushing it firmly onto the wand.
Twist wand or tool slightly to tighten or
loosen the connection.
30
Select proper tool
30
lamps, lighting fixtures, venetian blinds,
baseboards, shutters, and registers.
B. Furniture nozzle may be used for
upholstered furniture, draperies,
mattresses, clothing, automobile
interiors, and carpeted stairs.
C. Crevice tool may be used in tight
spaces, corners and along edges in
such places as dresser drawers,
upholstered furniture, stairs and base-
boards.
D. Wands are used to give extra length
to your hose. Use them with any of the
above tools.
C
A
B
C
A. Dusting brush may be used for
carved furniture, table tops, books,
D
7