Hoover U5433 Owner's Manual page 3

STEP II Attach rack and handle
2
Open tool cover on handle
2
section (A).
5
A
Remove bag door on cleaner
5
body by pushing down at top of
door and pulling door outward.
Switch (A) above bag door should
be in OFF position.
8
Place nuts in recessed areas on
8
front of handle. Hold each nut
in place while tightening each bolt
securely with a Phillips screw driver.
3
B
C
A
Attach hose rack to handle
3
section by fitting hooks (B) on
rack over slots (C) on handle
section.
6
While holding rack in place,
6
slide handle onto cleaner body.
Make sure tab is inserted fully into
slot.
9
Reposition bag door by fitting
9
center tabs on bottom of door
into opening. Press top of door to
snap securely shut.
4
Align hole on rack with circular
4
tab on handle.
7
Push bolts into holes on back of
7
handle.
10
Press cord into the 3 notches
10
and the clip as shown.
Continued
3