Dell PowerEdge 2300 Upgrade Manual page 15

support.dell.com
inner card-guide
brackets (6)
thumbscrew

     
         


To upgrade to Pentium II or Pentium III microprocessors in the PowerEdge 4350, per-
form the following steps:
1. Access the system board, which involves the following steps:
a. Disconnecting power and peripheral cables.
b. Removing the covers.
c. Removing the front bezel.
d. Removing the cooling fan shroud.
See your system Installation and Troubleshooting Guide for specific instructions,
if needed.
Dell PowerEdge Systems — Microprocessor Upgrade 1-11