Auxiliary-device (pointing device) connector
Use this connector to connect a mouse or other pointing device. Figure 43 shows
an auxiliary-device connector.
6
4
Figure 43. Auxiliary-device connector
Ethernet connectors
Figure 44 shows an Ethernet connector.
Figure 44. Ethernet connector
Connect a Category 3, 4, or 5 unshielded twisted-pair cable to this connector. The
100BASE-TX and 1000BASE-T Fast Ethernet standards require Category 5 or
higher cabling.
Notes:
1. The server has three Ethernet connectors. Two of the Ethernet connectors are
2. The third Ethernet connector is a dedicated connector that is active only when
Keyboard connector
Use this connector to connect a PS/2 (non-USB) keyboard to the server. Figure 45
shows a keyboard connector.
6
4
Figure 45. Keyboard connector
If you attach a keyboard to this connector, USB ports and devices are disabled
during POST.
50
xSeries 336 Type 1879 and Type 8837: Hardware Maintenance Manual and Troubleshooting Guide
5
3
1
2
8
1
attached to the Ethernet controllers. See the IBM xSeries 336 Type 8837 User's
Guide on the IBM xSeries Documentation CD for more information about the
Ethernet controllers.
you install an optional Remote Supervisor Adapter II SlimLine. This dedicated
connector is the Remote Supervisor Adapter II SlimLine Ethernet connector.
5
3
1
2