Dell PowerEdge 180AS User Manual page 62

Expanding and Refreshing Your Viewer
By default, there are three buttons that display on the Viewer toolbar that
allow you to adjust the Viewer display. The first button allows you to set the
Viewer to Single Cursor Mode. This allows you to use the mouse in the
Viewer as if it was the mouse on the server. When the Viewer is set to Single
Cursor mode the local cursor is not displayed.
NOTE:
Single Cursor mode operates on Windows platforms only.
The second button allows you to refresh the video and the third allows you to
align the mouse cursors.
Figure 4-5. Viewer Toolbar- Display Adjustment Buttons
To set the Viewer to Single Cursor mode:
In the Viewer toolbar, click the Single Cursor Mode button.
To refresh the screen:
Click the Refresh Image button on the Viewer toolbar.
-or-
From the Viewer menu, select View - Refresh. The digitized video image will
be completely regenerated.
To align the mouse cursors:
Click the Align Local Cursor button on the Viewer toolbar. The local cursor
will align with the cursor on the remote server.
To enter full screen mode:
Click the Maximize button in the top right-hand corner of the Viewer.
-or-
From the Viewer menu, select View - Full Screen. The desktop window will
disappear and only the accessed server desktop will be visible. The screen will
be resized up to a maximum of 1600 x 1200 (standard) and 1680 x 1050
(widescreen). If the desktop has a higher resolution, then a black background
will surround the full screen image. The floating toolbar will appear.
To exit full screen mode:
56
Using the Viewer