Dell PowerEdge 180AS User Manual page 29

To discover a Remote Console Switch:
1 Select Tools - Discover from the Explorer menu from the software. The
Discover Wizard appears. Click Next to continue.
2 The Address Range page appears. Complete one of the following steps:
If you are using IPv4 mode, select Use IPv4 address range, and type the
range of IP addresses you wish to search on the network in the To Address
and From Address boxes. IPv4 addresses are entered in xxx.xxx.xxx.xxx dot
notation.
- or -
If you are using IPv6 mode, select Use IPv6 address range, and type the
range of IP addresses you wish to search on the network in the To Address
and From Address boxes. IPv6 addresses are entered in hexadecimal
FD00:172:12:0:0:0:0:33 notation or compressed FD00:172:12::33 notation.
3 You may also change the default HTTP and HTTPS port numbers, if the
Remote Console Switch has changed from the default on the serial
console, by typing the new port numbers in the HTTP Port and HTTPS
Port fields. Click Next to continue.
4 The Searching Network progress bar appears. Progress text indicates how
many addresses have been probed from the total number specified by the
range and the number of Remote Console Switches or Avocent switches
found. If one or more new Remote Console Switches or Avocent switches
are discovered, the Wizard shows the Select Remote Console Switches to
Add page. From this page, you can choose the Remote Console Switches
to add to the local database.
-or-
If no new Remote Console Switches were found (or if you clicked Stop),
the Wizard will show the No New Remote Console Switches Found page
and you will need to add the switch manually. For more information, see
the previous procedure.
5 Click the Remote Console Switch(es) you wish to add and click the Add
(>) button to move the selection to the Remote Console Switches to Add
list.
Basic Software Operation
23