Unpacking; Locating Materials - Compaq ProLiant 800 Setup And Installation Manual

2-4 Overview of Installing the ProLiant 800 Server

Unpacking

Unpack the server, keyboard, and cables according to the instructions and
illustrations printed on the shipping carton(s).

Locating Materials

Locate the following materials that were shipped with your new server:
Compaq ProLiant 800 server
Keyboard
Mouse
Power cord
Wide to Standard SCSI adapter (not needed if installing Wide SCSI devices)
Documentation inside the server (most of the option installation and
setup instructions are located on the labels, which are attached to the
inside of the large access panel and the small access panel)
Documentation and software packs inside the shipping box: Server
Setup and Management, Reference Information, and Software Products
In addition to these supplied items, you may need:
T-15 Torx screw driver
Options to be installed such as expansion boards, monitors, uninterruptible
power supply (UPS), or memory
Application software diskettes
CAUTION: Protect the server from power
fluctuations and temporary interruptions with a
regulating uninterruptible power supply (UPS). This
device protects the hardware from damage caused by
power surges and voltage spikes and keeps the
system in operation during a power failure.