Automatic Login After Reboot; Proxy Configuration Parameters - HP Integrity rx2600 Installation Manual

Install, Reuse, Upgrade
Install
Install
Install
NOTE: Passwords must be alphanumeric characters or - _ $ & ^ % # = ` ~ | < > period and space. Do not use a $ as the first
character or a space as the last character in the account password.
If you are not installing VPM 3.0, your password can also include + \ [ ] ( ) * ! @ ; and comma.
NOTE: If HP SIM is already installed, the HP Insight software Integrated Installer reads the service and database credentials from
the previous HP SIM installation. You must upgrade using these same credentials.
Record the information so an automatic login after rebooting occurs.
Table 3-6 Automatic login after reboot
Install, Reuse, Upgrade
Install or Upgrade
Install or Upgrade
NOTE: Passwords must be alphanumeric characters or - _ $ & ^ % # = ` ~ | < > period and space. Do not use a $ as the first
character or a space as the last character in the account password.
If you are not installing VPM 3.0, your password can also include + \ [ ] ( ) * ! @ ; and comma.
Record the proxy configuration parameters in the following table.
Table 3-7 Proxy configuration parameters
Install, Reuse, Upgrade
Install
Install
Install
20 HP Insight Software installation and configuration parameters
Parameter Value
Database hostname
Database instance name
Database port
Parameter Value
Enable automatic logon
Logon password
Parameter Value
I use an HTTP proxy
server
Proxy host
Proxy port
Possible value Description
Valid hostname The host name or IP
address of the database
server
Valid database instance. The existing database
Leave blank to use the instance name (optional)
default instance
Range: 65535 The database port to be
used for the components
Default: 1433
Possible value Description
Yes or No A reboot might be
required after installing
or upgrading HP SIM or
Insight Rapid Deployment
. To enable an automatic
login to continue the
installation after the
reboot, provide
credentials for a one-time
login.
Valid password for the The password for the
current installation user. current user that will be
used to logon after the
reboot.
Possible value Description
Whether environment If your environment
requires a proxy server requires a proxy to
for Internet access access the Internet, the
installer configures your
proxy settings for the
Insight software update
utility and Vulnerability
and Patch Management
Pack. You can configure
this setting during or after
installation.
IP address The hostname for proxy
(###.###.###.### server. (Software Update
and HP Vulnerability and
where ### ranges from
0 to 255) or the name of Patch Management Pack
must access the Internet
a valid, fully qualified
for updates.)
host
Valid port number The port for proxy server.
ranging from 0 to 65535