Hp_Etheventsettings - HP Integrity BL860c Datasheet

Table 13-23
Property name
Key: Element
Key: PhysicalLocation

13.3.23HP_EthEventSettings

HP_EthEventSettings models configurable Ethernet Indication settings. The Windows implementation
class is HP_WinEthEventSettings.
Table 13-24
Property name
Caption
Description
ElementName
Key:InstanceId
ActiveAdapterCountChanged
FloodThreshold
InterfaceAvailable
InterfaceUnAvailable
MaxFloodLevel
MemberJoinedTeam
MemberLeftTeam
Class: HP_ElementLocation
Class: HP+EthEventSettings
Property implementation
CIM_ElementLocation
ref:HP_EthernetPort
ref:HP_Location
HP_ElementLocation
HP_WinElementLocation
Property implementation
CIM_SettingData
HP Ethernet Event Provider configurable settings for
Windows
HP Ethernet Event Provider configurable settings for
Windows
HP Ethernet Event Provider configurable settings for
Windows
0
HP_EthEventSettings
HP_WinEthEventSettings
If enabled, an event is generated when a change is
detected in number of active adapter count of a team.
Default: disabled.
Time, in seconds, used for indication flood control.
Default: 10 seconds
If enabled, an event is generated when a network
interface becomes available. Default: disabled.
If enabled, an event is generated when a network
interface becomes unavailable. Default: disabled.
Max number of events within Flood Threshold. Default:
100 events.
If enabled, an event is generated when an adapter
joins a team. Default: disabled.
If enabled, an event is generated when an adapter
leaves a team. Default: disabled.
Ethernet Teaming 155